广西11选5玩法介绍:Graphited PTFE Packing with oil

Compressed Asbestos Jointing Sheet
2017-12-15

Graphited PTFE Packing with oil

Usage Equipment for Pure PTFE packing with oil: Pumps, valves, flanges.

Material:
graphite-PTFE compound with lubricant. very good thermal conductivity.High flexibility and volumetric stability,no embrittlement or ageing. Long life with good operating efficiency. Gentle treatment of shafts. It have lubricant

pure PTFE packing with oil is PTFE yarn with a special silicone oil lubricant, the number of low friction for dynamic seal pumps. Therefore, the packing is generally not recommended to use high-speed pumps.

Usage Equipment for Pure PTFE packing with oil:
Pumps, valves, flanges.

Industry for pure PTFE packing with oil:
Food industry, medicine, papermaking, chemical fiber, fine chemicals, such as the operation does not allow pollution occasions.
Media:
For molten alkali metals and at the free fluoride ion than all media.

Technical Data sheet for pure PTFE packing with oil

Material

Pure PTFE yarn with ?oil

Temperature Range

-150 up to +260 oC

Process

Rotating

15 bar

Reciprocating

100 bar

Static

200 bar

Shaft Speed

10m/s

PH

0~14

Density

1.6g/cm3

 

Application Areas:
Style Aidmer76-024B can be used in pumps, agitators mixers and kneader centrifugal pumps, agitators, involving high peripheral speeds and temperatures, where pure PTFE packing fail.
Application Media:
Style Aidmer76-024B is suitable for liquid and gaseous,acids, lyes, solvents, adhesives, abrasive and crystalline media like sewage, slurries, salt, etc
Not suitable for:
Highly oxidizing media like oleum, fuming nitric acid, aqua regia, gaseous fluorine, lacquer and paints.

PTFE graphite packing is a?braided packing made of PTFE yarn containing graphite particles and anti-corrosive lubricant. It is recommended for shafts for almost all chemicals. Stability
and long service lift are achieved by low friction coefficient. It has great tear strength and high thermal conductivity. This self-lubricating packing does not score the shaft and minimizes sleeve replacement cost. It can be used to seal alkalis, solvents, water, steam, acids except strong oxidizing acids(aqua regia, fuming nitric acid, fuming sulfuric acid, etc.) forcentrifugal pumps, autoclaves agitators, mixers, etc.

PTFE graphite packing is a?braided packing made of PTFE yarn containing graphite particles and anti-corrosive lubricant. It is recommended for shafts for almost all chemicals. Stability
and long service lift are achieved by low friction coefficient. It has great tear strength and high thermal conductivity. This self-lubricating packing does not score the shaft and minimizes sleeve replacement cost. It can be used to seal alkalis, solvents, water, steam, acids except strong oxidizing acids(aquaregia, fuming nitric acid, fuming sulfuric acid, etc.) forcentrifugal pumps, autoclaves agitators, mixers, etc.

Leave a Reply

网上棋牌赌博送10元 押庄龙虎刷流水技巧 微信三公游戏下载 北京单场胜负投注 广东11选5一期计划软件 重庆开奖历史开奖记录 双色球官方下载 幸运快三免费计划软件 财神捕鱼网址下载 江西新时时开奖直播 中福快三计划软件下载 斗牛配牌口诀 pk10赛车计划5码3期 凤凰论坛高手 竞彩网 彩经网专家杀号定胆